||Cleaning Freq.,Food Contact Su
||Food-contact surface(s) used for nonpotentially hazardous food(s) beverage dispensing nozzles
||wait station pop machine
||Found the pop nozzles of the pop machine on the right wait station soiled with heavy accumulation and the pop nozzles of the pop machine on the left wait station soiled with accumulation. Pic corrected by having employee wash, rinse and sanitize pop nozzles. This is a repeated critical violation and a risk control plan for cleaning food contact surfaces has been issued. ,
||Hot and cold holding
||Cold food item(s)
||cooking/preparation area cooler
||Stored above 41 degrees F
||Found cold time/temperature control for safety (tcs) food, a container of liquid egg 51°F in a container of melted ice/water in the top portion well of the central cooler on the cooking line. Pic corrected by having employee discard eggs, refilled container with ice, and place a fresh container of liquid egg in the ice bath in the top portion well of the central cooler. Pic has been instructed to monitor that liquid eggs are held at 41°F or lower, and employees are monitoring and filling ice as it melts. Found hot tcs food, a container of baked potatoes 105°F, and sweet potatoes 97°F, in the right drawer hot holding unit. Pic corrected by discarding potatoes and states hot holding unit was not turned on. Pic has been instructed to monitor that hot tcs food is held at 135°F or above and employees are turning on equipment. ,
||Equipment, Cleaning Frequency
||Warewashing equipment dishmachine
||Dishwashing machine spray head nozzle
||Not cleaned Through out the day as necessary
||Found 2 upper spray nozzles of the dishwashing machine clogged with debris. Employee corrected by cleaning spray rinse nozzles, and has been reminded to clean on a more frequent schedule.
||Found the main entrance area lacking no smoking sign. To correct provide and post no smoking sign.
||Good Repair and Proper Adjustm
||walk in cooler drain lines
||In poor repair
||Found the drain line of the walk in cooler lacking cover/insulation. To correct provide and install insulation/covering on the drain line leading to the wall of the walk in cooler.